keepalived实现Tomcat服务双机热备

欢迎支持笔者新作:《深入理解Kafka:核心设计与实践原理》和《RabbitMQ实战指南》,同时欢迎关注笔者的微信公众号:朱小厮的博客。

 

欢迎跳转到本文的原文链接:https://honeypps.com/backend/keepalived-tomacat-standby/

 

项目中需要采用tomcat双机热备机制,以确保系统性能。本人通过查阅资料以及亲自实现完成,写下这篇博文,供个人读者参考。

 

 

1. 规划

1.1服务器环境规划

负载服务器master及WEB服务器1真实IP:10.10.195.53

负载服务器backup及WEB服务器2真实IP:10.10.195.190

负载服务器虚拟ip:10.10.195.212

1.2 软件环境规划

操作系统:Red Hat Enterprise Linux Server release 5.6 (Tikanga)

keepalived:keepalived-1.2.19

Java:jdk-1.7.0_79

Tomcat:apache-tomcat-7.0.64

2. 负载服务器配置

这里只叙述如何安装配置keepalived,至于java以及tomcat的安装及配置,这里不赘述。

2.1 安装keepalived

 

[~]tar -zxvf keepalived-1.2.19.tar.gz
[~] cd keepalived-1.2.19
[keepalived-1.2.19] ./configure --prefix=/usr/local/keepalived --disable-fwmark
#(如果直接输入./configure有可能报错:configure:error: No SO_MARK declaration in headers)
[keepalived-1.2.19] make
[keepalived-1.2.19] make install


2.2 配置keepalived服务

 

 

[keepalived-1.2.19] cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
[keepalived-1.2.19] cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
[keepalived-1.2.19] cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
[keepalived-1.2.19] mkdir /etc/keepalived
[keepalived-1.2.19] cp /usr/local/keepalived/etc/keepalived/keepalived.conf/etc/keepalived/
[keepalived-1.2.19] chkconfig --add keepalived
[keepalived-1.2.19] chkconfig keepalived on


 重启\启动\关闭\查看状态keepalived

 

service keepalived restart

service keepalived start

service keepalived stop

service keepalived status

2.3 配置keepalived.conf文件

 

[~]mv /etc/keepalived/keepalived.conf/etc/keepalived/keepalived.conf.bak
[~]vi /etc/keepalived//keepalived.conf 

 

主备机的keepalived.conf文件大致相同,只是注意红色标注的地方。

主机配置:

 

global_defs {
   router_id NodeA
}
vrrp_script chk_http_port {
   script "/opt/tomcat.pid"
   interval 5
   weight 2
}
vrrp_instance VI_1 {
   state MASTER
   interface eth0
   virtual_router_id 52
   priority 150
   advert_int 1
 
   authentication {
       auth_type PASS
       auth_pass 1111
    }
 
   track_script {
       chk_http_port
    }
 
   virtual_ipaddress {
       10.10.195.212
    }
}

 

备机配置:

 

global_defs {
   router_id NodeB
}
vrrp_script chk_http_port {
   script "/opt/tomcat.pid"
   interval 5
   weight 2
}
vrrp_instance VI_1 {
   state BACKUP
   interface eth0
   virtual_router_id 52
   priority 100
   advert_int 1
 
   authentication {
       auth_type PASS
       auth_pass 1111
    }
 
   track_script {
       chk_http_port
    }
 
   virtual_ipaddress {
       10.10.195.212
    }
}

 

2.4配置/opt/tomcat.pid

 

#!/bin/bash
#description: check tomcat service anddecide whether stop the keepalived or not
#edited by zzh: 2015-10-14
 
CATALINA_HOME=/users/shr/apache-tomcat-7.0.64
JAVA_HOME=/users/shr/util/JavaDir/jdk
export CATALINA_HOME
export JAVA_HOME
 
ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | wc | awk '{print $2}' >tomcat_process_count.txt
read line < tomcat_process_count.txt
 
start_tomcat=$CATALINA_HOME/bin/startup.sh
 
if [ ${line} -lt 1 ]
then
       echo -n "===Starting tomcat===:"
       ${start_tomcat}
       # :sudo service tomcat start
       echo "===tomcat start ok.==="
       sleep 3
 
       # check the tomcat status.
       ps ax --width=1000 | grep "org.apache.catalina.startup.Bootstrapstart" | grep -v "grep" | awk '{printf $1 " "}' | wc |awk '{print $2}' > tomcat_process_count.txt
       read line2 < tomcat_process_count.txt
       if [ ${line2} -lt 1 ]
       then
                sudo service keepalived stop
       fi
fi
rm tomcat_process_count.txt
#shell end.

 

3. 日志查看

3.1 正常启动

输入tail -f /var/log/messages查看启动keepalived日志:

MASTER10.10.195.53

 

Sep 29 15:49:16 shr Keepalived[5536]:Starting Keepalived v1.2.19 (09/21,2015)
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.53added
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.53added
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Registering Kernel netlink reflector
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Registering Kernel netlink command channel
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Opening file'/etc/keepalived/keepalived.conf'.
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Configuration is using : 6572 Bytes
Sep 29 15:49:16 shr Keepalived[5537]:Starting Healthcheck child process, pid=5538
Sep 29 15:49:16 shr Keepalived_healthcheckers[5538]:Using LinkWatch kernel netlink reflector...
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.53 added
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.53 added
Sep 29 15:49:16 shr Keepalived[5537]:Starting VRRP child process, pid=5539
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering Kernel netlink reflector
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering Kernel netlink command channel
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering gratuitous ARP shared channel
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Configuration is using : 36541 Bytes
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Using LinkWatch kernel netlink reflector...
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]
Sep 29 15:49:17 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Transition to MASTER STATE
Sep 29 15:49:17 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Received lower prio advert, forcing new election
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Entering MASTER STATE
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) setting protocol VIPs.
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.195.212
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.212 added
Sep 29 15:49:18 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.212added
Sep 29 15:49:23 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.195.212

 

(BACKUP:10.10.195.190)

 

Sep 29 15:46:25 server1 Keepalived[18218]:Starting Keepalived v1.2.19 (09/25,2015)
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Netlink reflector reports IP 10.10.195.190added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Netlink reflector reports IP 10.10.195.190added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Registering Kernel netlink reflector
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Registering Kernel netlink command channel
Sep 29 15:46:25 server1 Keepalived_healthcheckers[18220]:Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Configuration is using : 6682 Bytes
Sep 29 15:46:25 server1 Keepalived[18219]:Starting Healthcheck child process, pid=18220
Sep 29 15:46:25 server1 Keepalived[18219]:Starting VRRP child process, pid=18221
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Netlink reflector reports IP 10.10.195.190 added
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Netlink reflector reports IP 10.10.195.190 added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Using LinkWatch kernel netlink reflector...
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering Kernel netlink reflector
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering Kernel netlink command channel
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering gratuitous ARP shared channel
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:46:25 server1 Keepalived_vrrp[18221]:Configuration is using : 36651 Bytes
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Using LinkWatch kernel netlink reflector...
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: VRRP_Instance(VI_1) Entering BACKUP STATE
Sep 29 15:46:25 server1 Keepalived_vrrp[18221]:VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]

 

3.2 主备切换

l  当在主机(MASTER:10.10.195.53)中输入 sudoservice keepalived stop,此时就会进行主备切换,主机切换成备机。

主机(MASTER:10.10.195.53)输出如下

 

Oct 14 13:25:09 shr Keepalived_vrrp[26683]:VRRP_Instance(VI_1) sending 0 priority
Oct 14 13:25:09 shr Keepalived_vrrp[26683]:VRRP_Instance(VI_1) removing protocol VIPs.
Oct 14 13:25:09 shrKeepalived_healthcheckers[26682]: Netlink reflector reports IP 10.10.195.212removed
Oct 14 13:25:09 shr Keepalived[26681]:Stopping Keepalived v1.2.19 (09/21,2015)

 

备机(BACKUP:10.10.195.190)输出如下

 

Oct 14 13:19:58 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for10.10.195.212
Oct 14 13:19:59 server1 Keepalived_healthcheckers[30889]:Netlink reflector reports IP 10.10.195.212 added
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: Netlink reflector reports IP 10.10.195.212 added
Oct 14 13:20:04 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for10.10.195.212

 

l  当在主机(MASTER:10.10.195.53)中输入sudoservice keepalived start,此时就会切换成主机。备机(BACKUP:10.10.195.190)输出如下信息:

 

Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Received higher prio advert
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Entering BACKUP STATE
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) removing protocol VIPs.
Oct 14 13:25:11 server1Keepalived_healthcheckers[30889]: Netlink reflector reports IP 10.10.195.212removed
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: Netlink reflector reports IP 10.10.195.212 removed

 

4. 查看虚拟ip

可以通过ip add show命令查看添加的虚拟ip:

 

[shr@shr bin]$ip add show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu16436 qdisc noqueue
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:0c:29:6b:f2:a8 brd ff:ff:ff:ff:ff:ff
   inet 10.10.195.53/24 brd 10.10.195.255 scope global eth0
   inet 10.10.195.212/32scope global eth0

 

5. 常见错误

5. 1常见错误一:

 

/var/log/messages has thousands of errorslike this:
 
Jun 28 09:18:32 rust Keepalived_vrrp:receive an invalid ip number count
associated with VRID!
Jun 28 09:18:32 rust Keepalived_vrrp: bogusVRRP packet received on eth0 !!!
Jun 28 09:18:32 rust Keepalived_vrrp:VRRP_Instance(VI_1) Dropping received
VRRP packet...
 
The backup director starts up, but doesn'tlisten on the virtual addresses
at all. Its /var/log/messages has thousands of errors like this:
 
Jun 28 06:25:05 stye Keepalived_vrrp:receive an invalid ip number count
associated with VRID!
Jun 28 06:25:05 stye Keepalived_vrrp: bogusVRRP packet received on eth0 !!!
Jun 28 06:25:05 stye Keepalived_vrrp:VRRP_Instance(VI_1) ignoring received
advertisment...<span style="font-family: Arial, Helvetica, sans-serif; background-color: rgb(255, 255, 255);"> </span>

 

解决方法:

改变配置文件/etc/keepalived/keepalived.conf中virtual_router_id为另一个值即可。

(changed the vrid to another number and it worked fine).

5.2 常见错误二:

主机执行到VRRP_Instance(VI_1) Entering BACKUP STATE之后没有执行VRRP_Instance(VI_1)setting protocol VIPs。

解决方法:

可能是配置文件keepalived.conf中{左边没有空格。

 

linux添加tomcat服务

在/etc/init.d中输入 sudo vim tomcat

脚本具体内容如下:

 

#!/bin/bash
#chkconfig: 2345 10 90
#description: Starts and Stops the tomcatdaemon
#edited by ZZH: 2015-10-14
 
CATALINA_HOME=/users/shr/apache-tomcat-7.0.64
JAVA_HOME=/users/shr/util/JavaDir/jdk
export CATALINA_HOME
export JAVA_HOME
 
start_tomcat=$CATALINA_HOME/bin/startup.sh
stop_tomcat=$CATALINA_HOME/bin/shutdown.sh
 
if [ ! -f $CATALINA_HOME/bin/catalina.sh ]
then
         echo"===Tomcat is not available.==="
         exit
fi
 
start()
{
         echo-n "===Starting tomcat===:"
         ${start_tomcat}
         echo"===tomcat start ok.==="
}
 
stop()
{
         echo-n "===Shutting down tomcat===:"
         ${stop_tomcat}
         echo"===tomcat stop ok.==="
}
 
status()
{
         ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | wc | awk '{print $2}'> tomcat_process_count.txt
         readline < tomcat_process_count.txt
         rmtomcat_process_count.txt
         if[ $line -gt 0 ]
                   then
                            echo-n "tomcat ( pid = "
                            ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | awk '{print $1}'> tomcat_process_pid.txt
                            readpid < tomcat_process_pid.txt
                            rmtomcat_process_pid.txt
                            echo-n $pid
                            echo-n ") is running..."
                            echo
                   else
                            echo"tomcat is stopped"
         fi
}
 
case "$1" in
         start)
                   start
                   ;;
         stop)
                   stop
                   ;;
         restart)
                   stop
                   sleep1
                   start
                   ;;
         status)
                   status
                   ;;
         *)
                   echo"Usage:$0 {start|stop|restart}"
                   exit1
esac
 
exit 0
# shell end.

 

在终端输入:

 

sudo chmod 755 tomcat
sudo chkconfig --add tomcat

 

 

 

tomcat 启动 service tomcatstart

tomcat 关闭 service tomcatstop

tomcat 重启 service tomcatrestart

tomcat状态查看 service tomcatstatus

 

欢迎跳转到本文的原文链接:https://honeypps.com/backend/keepalived-tomacat-standby/

 

欢迎支持笔者新作:《深入理解Kafka:核心设计与实践原理》和《RabbitMQ实战指南》,同时欢迎关注笔者的微信公众号:朱小厮的博客。

相关推荐
©️2020 CSDN 皮肤主题: 编程工作室 设计师:CSDN官方博客 返回首页